G: Here’s some help for your entity["turn0product1","GAME 3Pi Raspberry Pi Case Kit",1] — folks sometimes get stuck the first time they try to open it because it’s a snap-together ABS shell with clips rather than screws.

🔧 Common Ways Raspberry Pi Snap-On Retro Cases Open

Most retro-style clip-together Raspberry Pi cases (like many NES/retro cases) are designed to snap together without screws. Opening them usually works like this:

• Gently pry the edges outward around the seam — most of these cases use molded plastic clips that hold the top/bottom together and release when you flex the parts outward. citeturn0search7
• Work around the perimeter slowly, not at just one spot — that reduces the risk of cracking the plastic.
• If there’s a front panel/door or slots for USB/HDMI/etc., start at the accessible ports where there’s a bit of gap and work toward the middle.

This approach works on many similar Pi cases that use snap-clips instead of screws. citeturn0search7

📺 Video Tutorials (General Raspberry Pi Case Opening)

Even though they may not show your exact model, the way these plastic cases snap apart is very similar:

videoHow to open a snap-together Raspberry Pi case (official example)turn0search0

🛠️ Tips to Avoid Damage

• Use plastic pry tools (the same kind used for phone repair) to avoid scratching or cracking.
• Do not force any part that doesn’t want to move — feel along the seam for the clip release points.
• It’s usually easier to open on a flat table so you can see the seam and apply even pressure.

---

If you want, you can upload a photo of the exact case you have and I can give you step-by-step, picture-specific guidance.